Bug: 111098596
Test: atrace/systrace

(cherry picked from commit 9ed5cf6e)

Change-Id: I97772ff21754d03a0aea0d53b39e8da5312a17c0

system_file_type is a new attribute used to identify files which exist
on the /system partition. It's useful for allow rules in init, which are
based off of a blacklist of writable files. Additionally, it's useful
for constructing neverallow rules to prevent regressions.

Additionally, add commented out tests which enforce that all files on
the /system partition have the system_file_type attribute. These tests
will be uncommented in a future change after all the device-specific
policies are cleaned up.

Test: Device boots and no obvious problems.
Change-Id: Id9bae6625f042594c8eba74ca712abb09702c1e5

Historically most uses of atrace happen via the shell domain.

There are two exceptions:
- boot tracing
- traced_probes

We need to get feature parity, so atrace has the same behavior
when is invoked either via shell or from its own domain (e.g.
via traced_probes that has an auto_trans rule into atrace on exec).
Atrace works by setting system properties to enable tracing from userspace
then poking all the binder services to read the system properties (see [1]) so
enabling the system_server category requires the ability to call binder
methods on the system_server.

For more use cases see b/113127224

[1]: https://android.googlesource.com/platform/frameworks/native/+/9ead54bed65d486fe435793cbe98ed8b4786f7be/cmds/atrace/atrace.cpp#545

Bug: 113127224
Test: Add an atrace category to the Perfetto config and confirm the data
shows up.

Change-Id: Id077eff960ffb1cdd7b0ce84b21ac9ef70444a4a

This CL adds the SELinux permissions required to execute
atrace and get userspace tracing events from system services.
This is to enable tracing of events coming from surfaceflinger,
audio HAL, etc.
atrace, when executed, sets a bunch of debug.atrace. properties
and sends an IPC via binder/hwbinder to tell the services to
reload that property.

This CL does NOT affect systrace. In that case (i.e. when
atrace is executed from adb/shell) atrace still runs in
the shell domain and none of those changes apply.

Change-Id: I11b096d5c5c5593f18bce87f06c1a7b1ffa7910e
Merged-In: I11b096d5c5c5593f18bce87f06c1a7b1ffa7910e
Merged-In: Iba195d571aec9579195d79d4970f760e417608c6
Bug: b/73340039

This CL adds the SELinux permissions required to execute
atrace and get userspace tracing events from system services.
This is to enable tracing of events coming from surfaceflinger,
audio HAL, etc.
atrace, when executed, sets a bunch of debug.atrace. properties
and sends an IPC via binder/hwbinder to tell the services to
reload that property.

This CL does NOT affect systrace. In that case (i.e. when
atrace is executed from adb/shell) atrace still runs in
the shell domain and none of those changes apply.

Change-Id: I11b096d5c5c5593f18bce87f06c1a7b1ffa7910e
Bug: b/73340039

This changes tracefs files to be default-enabled in debug mode, but
default-disabled with specific files enabled in user mode.

Bug: 64762598
Test: Successfully took traces in user mode.

Change-Id: I572ea22253e0c1e42065fbd1d2fd7845de06fceb

Bug: 37916906
Test: Builds 'n' boots.
Change-Id: Ia1d86264446ebecc1ca79f32f11354921bc77668
Merged-In: I208ec6a864127a059fb389417a9c6b259d7474cb

long live domain.te!

Remove all references.

Bug: 28760354
Test: build
Merged-In: I99953ecc7d275fdbe8e56d8f47a27d1f9e1cc09a
Change-Id: I99953ecc7d275fdbe8e56d8f47a27d1f9e1cc09a

long live domain.te!

Remove all references.

Bug: 28760354
Test: build
Change-Id: I99953ecc7d275fdbe8e56d8f47a27d1f9e1cc09a
(cherry picked from commit b8d14dc9a6b1593c4ad5210f3079bcac3a9aea33)

One of my previous commits removed this, so I am now restoring it.

This commit also contains a bit of cleanup from previous commits by
removing some unneeded types.

It also fixes traceur by porting ag/2409144 to master.

Bug: 62413700, 62547086
Test: Built, flashed, and booted Marlin.  Verified that the files have
the correct context.  Verified that atrace and traceur work.

Change-Id: I76fa0e9060aff554687d57ab3976c8704a4068f0

Service boottrace runs atrace out of shell context for tracing during
boot. Therefore, we need the same permission set in shell.te to run atrace
in boottrace service.

Bug: 34094010
Test: None
Change-Id: I94b2c3f9a74da377b0467112ebd4e1ee658847a4

On PRODUCT_FULL_TREBLE devices, non-vendor domains (except vendor
apps) are not permitted to use Binder. This commit thus:
* groups non-vendor domains using the new "coredomain" attribute,
* adds neverallow rules restricting Binder use to coredomain and
  appdomain only, and
* temporarily exempts the domains which are currently violating this
  rule from this restriction. These domains are grouped using the new
  "binder_in_vendor_violators" attribute. The attribute is needed
  because the types corresponding to violators are not exposed to the
  public policy where the neverallow rules are.

Test: mmm system/sepolicy
Test: Device boots, no new denials
Test: In Chrome, navigate to ip6.me, play a YouTube video
Test: YouTube: play a video
Test: Netflix: play a movie
Test: Google Camera: take a photo, take an HDR+ photo, record video with
      sound, record slow motion video with sound. Confirm videos play
      back fine and with sound.
Bug: 35870313
Change-Id: I0cd1a80b60bcbde358ce0f7a47b90f4435a45c95

atrace and its atrace_exec now exist only in private policy.

Test: No change to policy according to sesearch, except for
      disappearance of all allow rules to do with atrace_current
      which is expected now that atrace cannot be referenced from
      public or vendor policy.
Bug: 31364497

Change-Id: Ib726bcf73073083420c7c065cbd39dcddd7cabe3

Because I'm nitpicky.

Test: policy compiles
Change-Id: I4d886d0d6182d29d7b260cf1f142c47cd32eda29

Make all platform tyeps public to start to prevent build breakage in any devices
that may have device-specific policy using these types.  Future changes will
need to be carefully made to ensure we properly limit types for use by
non-platform policy.

Test: Builds
Change-Id: I7349940d5b5a57357bc7c16f66925dee1d030eb6

Divide policy into public and private components.  This is the first
step in splitting the policy creation for platform and non-platform
policies.  The policy in the public directory will be exported for use
in non-platform policy creation.  Backwards compatibility with it will
be achieved by converting the exported policy into attribute-based
policy when included as part of the non-platform policy and a mapping
file will be maintained to be included with the platform policy that
maps exported attributes of previous versions to the current platform
version.

Eventually we would like to create a clear interface between the
platform and non-platform device components so that the exported policy,
and the need for attributes is minimal.  For now, almost all types and
avrules are left in public.

Test: Tested by building policy and running on device.

Change-Id: Idef796c9ec169259787c3f9d8f423edf4ce27f8c

The label for /sys/kernel/debug/tracing was changed from debugfs
to debugfs_tracing in commit https://android-review.googlesource.com/187692 .
Ensure we're using the correct label.

Change-Id: I6cab9d6b9f3d96b41db26642b67d880b1ca17a8b

Motivation: Domain is overly permissive. Start removing permissions
from domain and assign them to the domain_deprecated attribute.
Domain_deprecated and domain can initially be assigned to all
domains. The goal is to not assign domain_deprecated to new domains
and to start removing domain_deprecated where it is not required or
reassigning the appropriate permissions to the inheriting domain
when necessary.

Bug: 25433265
Change-Id: I8b11cb137df7bdd382629c98d916a73fe276413c

This CL adds the SELinux settings required to support tracing
during boot.
https://android-review.googlesource.com/#/c/157163/

BUG: 21739901
Change-Id: Ib3a7107776141ac8cf4f1ca06674f47a0d4b6ae0