Change-Id: I864754043048a39003ea7fc8bb2749eab3a3d779

Default WMI credit is 2, in which case HST CE has shadow register issue.
Setting credit to 1 to serialize WMI commands is the fix.

Change-Id: I78f8da2daa623c0172ae166d527b424b796bb09f
CRs-Fixed: 2707022

Change-Id: I9cc50a634616683deea1c3a021c5a19c68fab426

Unified driver build makes separate driver per chip. Each of the driver
needs unique chip selection as driver cannot support multiple chips in a
single build. Pass proper chip configuration as build option.

Change-Id: I4b136b460f4cff9f8d4dd14f21455bc98459532c
CRs-Fixed: 2724608

FW on HST and HSP supports the WMI logging and
value of ini gEnablefwlog in the host code is by default
set to 1 which enables WMI logging so this ini
is not required in the ini file anymore.

Remove gEnablefwlog from the ini file for HST and HSP

CRs-Fixed: 2714735
Change-Id: I1e02b6e008f6d911173037d0d2f1ac17e8c6be9d

Strip support of NAN + SAP

CRs-Fixed: 2710957
Change-Id: I5c877a73d0b5794aee3d4ca45f432f93284cc9f5

Change-Id: Ie6666bdbfcca0aff83f072765b945e415b722162

Enable DTIM Synth for QCN7605

Change-Id: I313b4898c88d661b7dc657944d1a68562002ab07
CRs-Fixed: 2713245

Define path of WIFI_DRIVER_STATE_CTRL_PARAM i.e /dev/wlan
to update status of WLAN Driver on loaded/unloaded by writing
ON/OFF.

Change-Id: I9964a7a3b779f036975b3f461118e86e093a13ea
CRs-Fixed: 2706935

Change-Id: I3f8c5712cb7d08c5dffc8450aa9fd9ce043189f9

Currently value of ini "gEnablefwlog" is set to 2
which means logging through diag, as part of new
requirement change the value of ini "gEnablefwlog" to
1 to enable the WMI logging for FW.

Change-Id: Ib851fba2f1ea88126d1d7ca557af7e37b5ec8f12
CRs-Fixed: 2683323

Handle multiple chisets as listed using 'TARGET_WLAN_CHIP'

Change-Id: I6b78c332be554e823789ea0bac42d66fff7df3c2
CRs-Fixed: 2690385

Enable pktlog for QCN7605.

Change-Id: Idc8916535ebd5768f413d4ebd9c1095937b64c23
CRs-Fixed: 2694668

Some Rome issue found on msmnile_au and sdmshrike_au, but not
found on sm6150_au, root cause is ini gap, sm6150_au 6174 ini
is got from platform: 8996AU/APQ8096 which passed CS,
can be used for msmnile_au and sdmshrike_au too.

Fixed issues like:
1. 200/s flooding unknown phy error event from F/W.
With dfsPhyerrFilterOffload=1, F/W can filter these events.

2. Ping failed from ref-sta to SAP when SAP+STA concurrency.
Roam only has 1 MAC/PHY, doesn't support dbs, can't reproduce
with gDualMacFeatureDisable=1.
Default value 6 is wrong: enable DBS for connection but disable
simultaneous scan from upper layer (DBS scan remains enabled in
FW).

3. CLean up some non-existed legacy ini.

Change-Id: Iea1f298c90a12c7dc8c616be327f2da46d0a0dfc
CRs-Fixed: 2692134

With this patch nfc interface info in wps information element is
disabled and only certified config methods are enabled.

Change-Id: Iea297426ddc078172f5c71575656c65bcada9d5f
CRs-Fixed: 2680762

Currently there is requirement to support maximum 4 devs on Auto,
remove 'gNumVdevs' limit in qcn7605 ini so it equals default 4.

Change-Id: I701086b0f78d3633b3e966489a3d774c03f709ee
CRs-Fixed: 2686864

Handle multiple chisets as listed using 'TARGET_WLAN_CHIP'.

Change-Id: Id912f9faaba773797b7561c2a9c2f9f786b511e4
CRs-Fixed: 2661895

Change-Id: Ifdb1840fb0ca4e45499155b126255cf5faf2f52b

For multichip configuration, don't copy default ini configuration file
for WLAN.

Change-Id: I1ba114a8004b78b57e4b69d080acd2aebbfaf5e9
CRs-Fixed: 2666855

Increase the TCLring size to 3K for QCA6490 increased TPUTs.

Change-Id: I748532caea3b6052ce101269f347e3d8c7e9498e
CRs-Fixed: 2650398

Set gRuntimePM to 2.

Change-Id: I6e7f68e45121f97089f3f4e77df5b1d372f744ed
CRs-Fixed: 2662892

Add specific files for qca6390 and qca6490.

Change-Id: Iaf3d6b967e61765ad40d8839cbb1c68e71d9cf60
CRs-Fixed: 2661906

Change-Id: I8000f6c89f64e0dff9112007f7f77b768addb420

WLAN driver retrieve 'gInterfaceChangeWait' in ini
and store into 'hdd_config->iface_change_wait_time'.

The setting determines the timeout in 'psoc_idle_timeout_work'.
See the function 'hdd_psoc_idle_timer_start'.

The large value of 'gInterfaceChangeWait' affects system
sleep/wakeup.

If 'gInterfaceChangeWait' is un-defined, the default value
is 10000(ms).

The change shortens 'gInterfaceChangeWait' so that
system can sleep quickly.

Change-Id: Ia092d62259483c34bd5ab89b11881d9b5172baeb

Set default value of gEnableWoW to 3.

Change-Id: I0a7685a753a6aca71d4624cb429081e71457861b
CRs-Fixed: 2666609

Set WMI credit to 1 to serialize WMI commands.

Change-Id: If334c08227a064d034be08f6d54c6c5f9b4694fd
CRs-Fixed: 2649920

Modify antenna isolation to 30.

Change-Id: If4f6d57f3eb84bcc038b87ca8f4c4d2bdeac4835

Change-Id: I473e4645adbdbab59f0a0e51b03c6eaf25fe4bf1

To enable 11D host scan also need flag CONFIG_TARGET_11D_SCAN.

Change-Id: I7204107dc952b186b34112142d41b9caa0e143e9
CRs-Fixed: 2634613

Enable IPA offload on Lahaina+HSP

Change-Id: I56b7553cbff813393fe59680f9d74cf4e4db46a5
CRs-Fixed: 2653563

enable enhanced thermal mitigation feature for qcn7605

Change-Id: Ie5be9eabb426b72386f58fa243a75accb9962aaa
CRs-Fixed: 2631594