Change-Id: Ie6666bdbfcca0aff83f072765b945e415b722162

Change-Id: I3f8c5712cb7d08c5dffc8450aa9fd9ce043189f9

Currently value of ini "gEnablefwlog" is set to 2
which means logging through diag, as part of new
requirement change the value of ini "gEnablefwlog" to
1 to enable the WMI logging for FW.

Change-Id: Ib851fba2f1ea88126d1d7ca557af7e37b5ec8f12
CRs-Fixed: 2683323

Handle multiple chisets as listed using 'TARGET_WLAN_CHIP'

Change-Id: I6b78c332be554e823789ea0bac42d66fff7df3c2
CRs-Fixed: 2690385

Some Rome issue found on msmnile_au and sdmshrike_au, but not
found on sm6150_au, root cause is ini gap, sm6150_au 6174 ini
is got from platform: 8996AU/APQ8096 which passed CS,
can be used for msmnile_au and sdmshrike_au too.

Fixed issues like:
1. 200/s flooding unknown phy error event from F/W.
With dfsPhyerrFilterOffload=1, F/W can filter these events.

2. Ping failed from ref-sta to SAP when SAP+STA concurrency.
Roam only has 1 MAC/PHY, doesn't support dbs, can't reproduce
with gDualMacFeatureDisable=1.
Default value 6 is wrong: enable DBS for connection but disable
simultaneous scan from upper layer (DBS scan remains enabled in
FW).

3. CLean up some non-existed legacy ini.

Change-Id: Iea1f298c90a12c7dc8c616be327f2da46d0a0dfc
CRs-Fixed: 2692134

With this patch nfc interface info in wps information element is
disabled and only certified config methods are enabled.

Change-Id: Iea297426ddc078172f5c71575656c65bcada9d5f
CRs-Fixed: 2680762

Currently there is requirement to support maximum 4 devs on Auto,
remove 'gNumVdevs' limit in qcn7605 ini so it equals default 4.

Change-Id: I701086b0f78d3633b3e966489a3d774c03f709ee
CRs-Fixed: 2686864

Handle multiple chisets as listed using 'TARGET_WLAN_CHIP'.

Change-Id: Id912f9faaba773797b7561c2a9c2f9f786b511e4
CRs-Fixed: 2661895

Change-Id: Ifdb1840fb0ca4e45499155b126255cf5faf2f52b

For multichip configuration, don't copy default ini configuration file
for WLAN.

Change-Id: I1ba114a8004b78b57e4b69d080acd2aebbfaf5e9
CRs-Fixed: 2666855

Increase the TCLring size to 3K for QCA6490 increased TPUTs.

Change-Id: I748532caea3b6052ce101269f347e3d8c7e9498e
CRs-Fixed: 2650398

Set gRuntimePM to 2.

Change-Id: I6e7f68e45121f97089f3f4e77df5b1d372f744ed
CRs-Fixed: 2662892

Add specific files for qca6390 and qca6490.

Change-Id: Iaf3d6b967e61765ad40d8839cbb1c68e71d9cf60
CRs-Fixed: 2661906

Change-Id: I8000f6c89f64e0dff9112007f7f77b768addb420

WLAN driver retrieve 'gInterfaceChangeWait' in ini
and store into 'hdd_config->iface_change_wait_time'.

The setting determines the timeout in 'psoc_idle_timeout_work'.
See the function 'hdd_psoc_idle_timer_start'.

The large value of 'gInterfaceChangeWait' affects system
sleep/wakeup.

If 'gInterfaceChangeWait' is un-defined, the default value
is 10000(ms).

The change shortens 'gInterfaceChangeWait' so that
system can sleep quickly.

Change-Id: Ia092d62259483c34bd5ab89b11881d9b5172baeb

Set default value of gEnableWoW to 3.

Change-Id: I0a7685a753a6aca71d4624cb429081e71457861b
CRs-Fixed: 2666609

Set WMI credit to 1 to serialize WMI commands.

Change-Id: If334c08227a064d034be08f6d54c6c5f9b4694fd
CRs-Fixed: 2649920

Modify antenna isolation to 30.

Change-Id: If4f6d57f3eb84bcc038b87ca8f4c4d2bdeac4835

Change-Id: I473e4645adbdbab59f0a0e51b03c6eaf25fe4bf1

To enable 11D host scan also need flag CONFIG_TARGET_11D_SCAN.

Change-Id: I7204107dc952b186b34112142d41b9caa0e143e9
CRs-Fixed: 2634613

Enable IPA offload on Lahaina+HSP

Change-Id: I56b7553cbff813393fe59680f9d74cf4e4db46a5
CRs-Fixed: 2653563

enable enhanced thermal mitigation feature for qcn7605

Change-Id: Ie5be9eabb426b72386f58fa243a75accb9962aaa
CRs-Fixed: 2631594

Change-Id: Ia407acac2e1400e1c0c90ab925671680c80857e4

sdm710 doesn't support separate vdev for NAN. So disable this ini
and NAN shall be enabled in legacy way(on wlan0).

Change-Id: Ided351a1f6f6e8221700f12e018b85c2bbd6b62c
CRs-Fixed: 2635896

Enable power save for Genoa PCIE on msmnile/sm6150/sdmshrike as low poer
feature is ready.

Change-Id: I262e126e1dc1f049aa076af03c320c7c7c2f32e9
CRs-Fixed: 2619364

Change-Id: I91563e28ad52288b8fdbf6c5b2cd2ece309b5ea0

Btm offload is coupled with LFR3 in firmware, LFR3 is
disabled in Genoa firmware to save memory, btm offload can't
work either.

Change-Id: I65ee916482d2d7724ac3c9928ed2bdc3515b3636
CRs-Fixed: 2621354

Permit 4th connection for AP+STA(2g scc)+ AP+STA(5g scc) by
default in ini.

Change-Id: I131928499b093fceed5221acd1dec85bc44c46cc
CRs-Fixed: 2627441

Enable CONFIG_FEATURE_COEX and CONFIG_QCACLD_FEATURE_BTC_CHAIN_MODE.
Now nl80211 QCA vendor command for btc chain mode is available.

Change-Id: I390f380b707e806b12f9471dfd86d0c754f46b70
CRs-Fixed: 2515922

Enable CONFIG_FEATURE_COEX and CONFIG_QCACLD_FEATURE_BTC_CHAIN_MODE.
Now nl80211 QCA vendor command for btc chain mode is available.

Change-Id: I60922a358c6ba2e3671c6f27e91136c69f05eafe
CRs-Fixed: 2515922

Change-Id: I401f441df025c3bb7b783ffcf981cd1f2758e305

By default, set packet log buffer size to 1 MB for kamorta

Change-Id: I3ffea33146ef6f86b25e5e722ee20bbc3e9547d3
CRs-Fixed: 2614605

gMulticastHostFwMsgs should be enabled for sending of diag_event
and diag_log_packet to the userspace through netlink. There are
various diag_events which are sent to userspace and one of them
is data stall event. Without enabling this the data stall event
will not get routed and would impact the data stall detection
framework.

CRs-Fixed: 2614392
Change-Id: Ia9c6edf69e7bb1d6736c82ed0c5cb548b715e8b1