Increase the TCLring size to 3K for QCA6490 increased TPUTs.

Change-Id: I748532caea3b6052ce101269f347e3d8c7e9498e
CRs-Fixed: 2650398

Add specific files for qca6390 and qca6490.

Change-Id: Iaf3d6b967e61765ad40d8839cbb1c68e71d9cf60
CRs-Fixed: 2661906

WLAN driver retrieve 'gInterfaceChangeWait' in ini
and store into 'hdd_config->iface_change_wait_time'.

The setting determines the timeout in 'psoc_idle_timeout_work'.
See the function 'hdd_psoc_idle_timer_start'.

The large value of 'gInterfaceChangeWait' affects system
sleep/wakeup.

If 'gInterfaceChangeWait' is un-defined, the default value
is 10000(ms).

The change shortens 'gInterfaceChangeWait' so that
system can sleep quickly.

Change-Id: Ia092d62259483c34bd5ab89b11881d9b5172baeb

Set default value of gEnableWoW to 3.

Change-Id: I0a7685a753a6aca71d4624cb429081e71457861b
CRs-Fixed: 2666609

Set WMI credit to 1 to serialize WMI commands.

Change-Id: If334c08227a064d034be08f6d54c6c5f9b4694fd
CRs-Fixed: 2649920

Modify antenna isolation to 30.

Change-Id: If4f6d57f3eb84bcc038b87ca8f4c4d2bdeac4835

To enable 11D host scan also need flag CONFIG_TARGET_11D_SCAN.

Change-Id: I7204107dc952b186b34112142d41b9caa0e143e9
CRs-Fixed: 2634613

Enable IPA offload on Lahaina+HSP

Change-Id: I56b7553cbff813393fe59680f9d74cf4e4db46a5
CRs-Fixed: 2653563

enable enhanced thermal mitigation feature for qcn7605

Change-Id: Ie5be9eabb426b72386f58fa243a75accb9962aaa
CRs-Fixed: 2631594

sdm710 doesn't support separate vdev for NAN. So disable this ini
and NAN shall be enabled in legacy way(on wlan0).

Change-Id: Ided351a1f6f6e8221700f12e018b85c2bbd6b62c
CRs-Fixed: 2635896

Enable power save for Genoa PCIE on msmnile/sm6150/sdmshrike as low poer
feature is ready.

Change-Id: I262e126e1dc1f049aa076af03c320c7c7c2f32e9
CRs-Fixed: 2619364

Btm offload is coupled with LFR3 in firmware, LFR3 is
disabled in Genoa firmware to save memory, btm offload can't
work either.

Change-Id: I65ee916482d2d7724ac3c9928ed2bdc3515b3636
CRs-Fixed: 2621354

Permit 4th connection for AP+STA(2g scc)+ AP+STA(5g scc) by
default in ini.

Change-Id: I131928499b093fceed5221acd1dec85bc44c46cc
CRs-Fixed: 2627441

Enable CONFIG_FEATURE_COEX and CONFIG_QCACLD_FEATURE_BTC_CHAIN_MODE.
Now nl80211 QCA vendor command for btc chain mode is available.

Change-Id: I390f380b707e806b12f9471dfd86d0c754f46b70
CRs-Fixed: 2515922

Enable CONFIG_FEATURE_COEX and CONFIG_QCACLD_FEATURE_BTC_CHAIN_MODE.
Now nl80211 QCA vendor command for btc chain mode is available.

Change-Id: I60922a358c6ba2e3671c6f27e91136c69f05eafe
CRs-Fixed: 2515922

By default, set packet log buffer size to 1 MB for kamorta

Change-Id: I3ffea33146ef6f86b25e5e722ee20bbc3e9547d3
CRs-Fixed: 2614605

gMulticastHostFwMsgs should be enabled for sending of diag_event
and diag_log_packet to the userspace through netlink. There are
various diag_events which are sent to userspace and one of them
is data stall event. Without enabling this the data stall event
will not get routed and would impact the data stall detection
framework.

CRs-Fixed: 2614392
Change-Id: Ia9c6edf69e7bb1d6736c82ed0c5cb548b715e8b1

Ini config values TxPower2g and TxPower5g are not
getting used anymore.
Remove TxPower2g and TxPower5g from WCNSS_qcom_cfg.ini
for all the targets.

Change-Id: Id85bec3e4ae3bb8012e13844bb0afa682a593fee
CRs-Fixed: 2607679

Enabled IWifi Lazy HAL service on kamorta target
i.e. android.hardware.wifi@1.0-service-lazy
by making flag true i.e. TARGET_USES_WIFI_LAZY_HAL

Change-Id: I1b4ac51b8a6a584afd71507288ff694891f8871c
CRs-Fixed: 2613061

By default enable imps/bmps for hastings of auto 6155/8155/8195 platforms

Change-Id: I78f2026ab4a89eb4e61a7a534a0bb7b14cef8556
CRs-Fixed: 2595161

Wifi Passpoint is the common permission for all the targets.
So, adding it in wlan makefile.

Change-Id: I30df2278e693fa168de735d20d253da4e7b97200
CRs-Fixed: 2602279

Currently, with drop_bcn_on_chan_mismatch disable
default value of drop_bcn_on_chan_mismatch is overwritten
and abnormal rssi is observed for some beacons.
To avoid the issue remove drop_bcn_on_chan_mismatch
from ini, So that default value of drop_bcn_on_chan_mismatch
can be used.

Change-Id: I6e7ec9327a2e13d1fed73bec2fedf8b584989930
CRs-Fixed: 2588983

This change add flag to enable cal data delete feature
target-wise.

Change-Id: I0f04cb3b6d3f90f38f566e239e8a5277fa62fd09
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>

CRs-Fixed: 2595448
Change-Id: Ic89224eb8fe7f268e0c7ce31fe1cd2139bef4b39

Set g_prefer_5g_scc_to_dbs as 8 to prefer 5G SCC to DBS for
GO + STA(5G) mode

Change-Id: Ia8b337677f67e124773ed89ef8682bf4f711d971
CRs-Fixed: 2593074

Currently, gEnableRingBuffer is enabled by default and
Ring buffers use 10MB.

To avoid extra memory consumption, Disable ring buffer.
keep gEnableRingBuffer ini 0 to disable Ring buffer.

Change-Id: Ic89db68722fd3f9d316a1658561d8b38d6bf1b19
CRs-Fixed: 2592702

Add INI parameter RX_THREAD_UL_CPU_AFFINITY_MASK to
set rx thread affinity mask during UL traffic.

Change-Id: I6bf82fd6a9c8752c046609573797fe5af92734c2
CRs-Fixed: 2582399

Wlan makefile is wrongly including files from msmnile_au
when comipling sdmshrike_au. Change the path to the right
folder sdmshrike_au.

Change-Id: Ibc83aaeb008a4b3be2564f8164e94478aeb203b8
CRs-Fixed: 2586955