Add support for detecting SDA670 target and parsing the ramdumps.

Change-Id: Id52f49ccbf843789e1cce5e2249065ea96a9a953

Add board, cache and tlb dump parsing support for sdm670.

Change-Id: I8d3299ff2ea31a492d6845d7bf192d358eb859c2
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>

Reading byte by byte takes lot of time. So read complete buffer
at a time.

Change-Id: Ie9dcb74d9b75ee3adf2c7940a4b6530525a073fe

Add support to parse DCC dumps with autodump option to RDP
In autodump we give only ramdumps location without --ram-file
bin locations.

Change-Id: I87aa2b337415dd93cc5b60c813bf6cd1712f2565

	scandumpwrapper dumping the register as 0 instaed of 0x0,
	Due that scandump_reader string matching is failing

Change-Id: I1f86a224fb28a2f946328041472013a294ab1521

Fix for broken irqstat.py for 3.18 kernel.
In kernel 3.18, affinity is part of struct irq_data
whereas in kernel >= 4.4 affinity is part fo struct irq_common_data

Change-Id: I6c5b5417df86a818c1fc362ab881057074521d2f

	example: $6 = 0xffffff900fca <linux_banner> ...

Change-Id: I7fd098ea26d7e5c25590aa7c5d312a0545633686

	Read the linux banner data from vmlinux rodata section.
	Also read the linux banner data from ramump. Do a matching of both the data.
	If success then ramparser will go ahead and proces further
Change-Id: I1b9245f1a4fcc9cdff0a3bfb7293b2385981feba

Use correct API to calculate the total ion memory allocation.
On 64bit platforms, the amount of memory allocated by ion can
exceed 32 bits.

Change-Id: I3a99392a921a288e3581bb842bb9989bd7c0d696

cpu_possible_bits / cpu_online_bits are not available at kernel 4.9
replace them with __cpu_possible/online_mask

Change-Id: I672798f27c24991230d31698e4d318a8af56c443

Fix CPU number of watchdog task in 4.9 kernel and
fix next event for hotplugged CPU.

Change-Id: Ia0c13ec61bb667a16901027f8f8a132153957c9f

Fix for broken clockdump.py for kernel 4.9

Change-Id: Id2867eebd413f66d6406bbd6fba214d0f642d772

Add support for detecting SDX20 SoC info and hardware IDs.

Change-Id: I39ea7b9d4446574e2012edfb7a33690281c9920b

	here fp is value is coming less than page_offset.
	Due that rest of the call stack is not getting printed

Change-Id: Ie878d41f0ecc16d21f9795c699f035a7460904b4

Fix for broken pagetracking.py for kernel 4.9

Change-Id: Iffc8ca870fb22dc5153914d8cfd3b04d618771a3

	We have to use alternate PC value if PC is bad.
	We will have 2 alternate PC values(ALT_PC_1 and ALT+PC_2),
	we should pick nearest value to the 32bit PC.
	If PC is 64bit value the take the PC only

Change-Id: Ibf74bea1d549fd5d1e1549da5d3ae898c9606d43

Print timer related info to analyze NS Watchdog issues.

Change-Id: Ib398075b58bd7063e24248597c7869ced8d8a645

Fix variable name change of cpu_online_bits for 4.9 kernel

Change-Id: Ic04d2327f41e678e1e6bcfb1e8e05cbf47b4e515

Current Linux Ram Dump Paser scripts are only able to load kernel
symbols by default. No loadable modules' symbols will be parsed
at startup time, which may result in 'unknown symbols' in some
cases, especially when checking SLAB info on dual-wifi platforms.

With this change, loadable modules' symbols can be parsed on
script startup by the following configurations:

1) Put all symbols under a certain dir, such as:

<dump_location>/symbols/wlan.ko
<dump_location>/symbols/wlan_sdio.ko

2) Add --sym_path when invoking the scripts, such as:

python %RAM_DUMP_PARSER_PATH%\ramparse.py --sym_path
<dump_location>/symbols

With the above actions, all loadable modules' symbols will be
parsed and stored for subsequent information dumping. Symbol
loading commands will also be added into the Trace32 startup
script.

Change-Id: Idda9c9a08cfd24c19bf4021e80fee5187cd031b9

It will parse scandump_core cmm file and write the putput in dmesg_TZ.txt file

Change-Id: If686505ffe279a471cc2cd625c15bcfb4ee32cca

Changing the Last Level Cache (System Cache) dump
details according to their structures. Dumps have
been collected without structure padding

Change-Id: Ic34c4517df1399b16b16007a08932d5ffe6043b8

modify irqstats.py for printing the affinity of irq in irqstats

Change-Id: I9e4f94364511238720a662171dfbb860d4722aa5

modify irqstats.py for printing the hwirq no in irqstats

Change-Id: I31367b037427aefa9397cc5a942aa92baa18b0bd

Print more info needed to analyze NS watchdog issues without
loading ramdump.

Change-Id: I3dd2624d6edf2cf639652cf6f06881b2fe0bebc0

Updates LLCC client version number to 0x10

Change-Id: I4e80d912b0c959f39a31767c9a7002d87e2b6a7a

SLUB allocation and freeing tracking storage address calculation
doesn't take into account the length of the red zone header,
resulting in incorrect stack dump when Linux RAM dump parser is
used to parse(with --slabinfo option)dumps generated with
SLUB_DEBUG options enabled.

Change-Id: I50f4c6d304ff1ecd57bfddb1bfa9441ff5cb3ac1

When cores are in PC, SDI would dump DCC, in this
scenario we will have DCC data at DDR and DCC_SRAM.BIN.
Call dcc_parse with appropriate params for above two scenarios.

Change-Id: Ia8382643998455e5c291159ac0f78bc52df9147c

The struct 'iommu_debug_attachment' no longer contains
the field 'dev'. Use appropriate fields to get the
required job done.

Change-Id: I794e0d507101c6cd131da97f31b18f319125eca0

The THREAD_INFO_IN_TASK kernel feature removes the thread_info
structure from task stack. Add support for this in the parser to handle
when this option is enabled.

Change-Id: I23eda300395936618e6d69eccd6c5d610c871ba8

Abstract out whether kaslr is enabled or not to allow ddrcompare to work
regardless of whether kaslr is enabled or not.

Change-Id: I4b00ed48748ce9a5a63c0905c99200ac9bfe4482

With new dcc_parser support DCC_SRAM.BIN is directtly
passed with given offset to read register information.

Change-Id: I84225fd63034a652de1ed67644251aa0e045b310

memstart_addr is now used by lrdp-v2 to retrieve lowmem page
address, but the variable is only defined on ARM64. Add code for
retrieving the same information on ARM32

Change-Id: I825b318962751b1b948df9cb948149e47e3fdf50

Do not attempt to parse the APM data structure if the pointer to
it is null.

Change-Id: I2894c217a5deaafe1ded2a628ddeefa026ca030b

Global variable name 'vm_stat' is changed in newer kernel
versions. Use the appropriate variable name depending on
the kernel version being used.

Change-Id: Ia36735bc22c1165ee2736ac39bf93fb2e4a86d0f

        As DCC is not going to be enabled on secure device,
        SDI would dump required registers in standard dcc dumping format.
        So extend ramparser’s DCC parsing support for <address><value> format.
        The KMISC section would contain all registers address value pair as mentioned below.
        Parse the data and generate the “dcc_captured_data.xml” and it should be same as actual dcc dump parsed xml.

Change-Id: Ib042ebc6895f0594f5784600174087a979e8709f

Change Client ID information for LLC (System) cache from 0x121 to 0x140.

Change-Id: Ieed438c7c1eb21e19e6d9d95ab14023ba6922f7c

Adding check for kernel 4.9 where radix tree lookup by
element has changed to use shift instead of height
so now using radix_tree_lookup_element_v2 in kernel 4.9

Change-Id: I8323da2d4ccd52f3dd27a776e9640e1f0d917675

Add support for generating sram.bin from DCC_SRAM.BIN
With this NEW sram will call version 2 of DCC driver
for parsing.

Change-Id: If8012b1f38ba29daa5bdac2fd15820de51ea9cab

Add support for detecting sdm450 target and parsing
the ramdumps and cachedumps.

Change-Id: I6d6626ff9827a7a85bbdbc4dbedab6974bdd7bb1

	A minidump supports fewer features than a full ramdump,
	but does not require the user to save all 4GB+ of memory.
	Instead a small subset of DDR is saved by crashscope as an elf file.
	Currently dmesg logs, rtb logs, and the cpu context parser are supported.

	Example usage: python ramparse.py --vmlinux <vmlinux> --minidump
			--ram-elf <elf_file> --ram-file <OCIMEM.bin> --everything

Change-Id: Ib689b4811d66472ac20aa7c63893fdaed915512e