spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection

For different sample clock source selection, the max frequency
flexspi supported are different. For mode 0, max frequency is 66MHz.
For mode 3, the max frequency is 166MHz.

Refer to 3.9.9 FlexSPI timing parameters on page 65.
https://www.nxp.com/docs/en/data-sheet/IMX8MNCEC.pdf



Though flexspi maybe still work under higher frequency, but can't
guarantee the stability. IC suggest to add this limitation on all
SoCs which contain flexspi.

Fixes: c07f2703 ("spi: spi-nxp-fspi: add the support for sample data from DQS pad")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250922-fspi-fix-v1-3-ff4315359d31@nxp.com


Signed-off-by: Mark Brown <broonie@kernel.org>