ASoC: codec: cs42l73: Convert to GPIO descriptors

of_gpio.h is deprecated, update the driver to use GPIO descriptors.
 - Use devm_gpiod_get_optional to get GPIO descriptor with default
   polarity GPIOD_OUT_LOW, set consumer name.
 - Use gpiod_set_value_cansleep to configure output value.

Checking the current driver using legacy GPIO API, the
reset value is first output HIGH, then LOW, then HIGH.

Checking the datasheet, Hold RESET LOW (active) until all the power
supply rails have risen to greater than or equal to the minimum
recommended operating voltages.

Since the driver has been here for quite long time and no complain on
the reset flow, still follow original flow when using GPIOD
descriptors.

Per datasheet, the DTS polarity should be GPIOD_ACTIVE_LOW. The binding
example use value 0(GPIOD_ACTIVE_HIGH) which seems wrong. There is
no in-tree DTS has the device, so all should be fine.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-6-e9496db544c4@nxp.com


Signed-off-by: Mark Brown <broonie@kernel.org>