ice: fix incorrect PHY settings for 100 GB/s

[ Upstream commit 6c5b9891 ]

ptp4l application reports too high offset when ran on E823 device
with a 100GB/s link. Those values cannot go under 100ns, like in a
working case when using 100 GB/s cable.

This is due to incorrect frequency settings on the PHY clocks for
100 GB/s speed. Changes are introduced to align with the internal
hardware documentation, and correctly initialize frequency in PHY
clocks with the frequency values that are in our HW spec.

To reproduce the issue run ptp4l as a Time Receiver on E823 device,
and observe the offset, which will never approach values seen
in the PTP working case.

Reproduction output:
ptp4l -i enp137s0f3 -m -2 -s -f /etc/ptp4l_8275.conf
ptp4l[5278.775]: master offset      12470 s2 freq  +41288 path delay -3002
ptp4l[5278.837]: master offset      10525 s2 freq  +39202 path delay -3002
ptp4l[5278.900]: master offset     -24840 s2 freq  -20130 path delay -3002
ptp4l[5278.963]: master offset      10597 s2 freq  +37908 path delay -3002
ptp4l[5279.025]: master offset       8883 s2 freq  +36031 path delay -3002
ptp4l[5279.088]: master offset       7267 s2 freq  +34151 path delay -3002
ptp4l[5279.150]: master offset       5771 s2 freq  +32316 path delay -3002
ptp4l[5279.213]: master offset       4388 s2 freq  +30526 path delay -3002
ptp4l[5279.275]: master offset     -30434 s2 freq  -28485 path delay -3002
ptp4l[5279.338]: master offset     -28041 s2 freq  -27412 path delay -3002
ptp4l[5279.400]: master offset       7870 s2 freq  +31118 path delay -3002

Fixes: 3a749623 ("ice: implement basic E822 PTP support")
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>