FROMLIST: usb: dwc3: core: Do not perform GCTL_CORE_SOFTRESET during bootup

According to the programming guide, it is recommended to
perform a GCTL_CORE_SOFTRESET only when switching the mode
from device to host or host to device. However, it is found
that during bootup when __dwc3_set_mode() is called for the
first time, GCTL_CORESOFTRESET is done with suspendable bit(BIT 17)
of DWC3_GUSB3PIPECTL set. This some times leads to issues
like controller going into bad state and controller registers
reading value zero. Until GCTL_CORESOFTRESET is done and
run/stop bit is set core initialization is not complete.
Setting suspendable bit of DWC3_GUSB3PIPECTL and then
performing GCTL_CORESOFTRESET is therefore not recommended.
Avoid this by only performing the reset if current_dr_role is set,
that is, when doing subsequent role switching.

Fixes: f88359e1 ("usb: dwc3: core: Do core softreset when switch mode")
Signed-off-by: Rohith Kollalsi <quic_rkollals@quicinc.com>

Bug: 240122498
Link: https://lore.kernel.org/lkml/20220714045625.20377-1-quic_rkollals@quicinc.com/


Change-Id: I3d249b3295bd043b3e492a4f9b771088178f8787
Signed-off-by: Mayank Rana <quic_mrana@quicinc.com>