Add support for detecting 8952 target and parsing the ramdumps.

Change-Id: Ic7d41826325e38ad58791f0710e82cd7bbb0c325

Add support for detecting the 8996 target and parsing the dumps.

Change-Id: I8288790eaa78b07f3c2b70e97e16c55534f5b736

Do not use hardcoded value for TTBR1. Compute TTBR1 value using
swapper_pg_dir_addr and phys_offset variables dynamically.

Change-Id: Ia9b4704b07e933c686e366ed0af8230be1d97e9c

Running launch_t32.bat with newer T32 gives syntax errors without newlines
before "SCREEN=" and "PRINTER=WINDOWS" strings in t32_config.t32. Add
newlines before these strings to avoid T32 syntax errors.

Change-Id: I53ffd02d4c86959804a89bd744bf1ce7f42f163c

Parse and print lpm levels and spm data for cpus and clusters.

Change-Id: Ied79d9317dff92cfe99d5a8fe9ee0539b8c62b4d

Rename a variable to better describe its purpose.
Change the size of the L2 cache for 8992 to the correct value.
Update version information for 8994.

Change-Id: Ie0bf7e9ff257555cc40467918d258b05bf4c2ada

If user specified --force-hardware, then skip the socinfo parsing to
determine the hardware/board information. The user is warned about
using the force-hardware option any way.

Checking for valid swapper_pg_dir in the vmlinux also ensures that
the parsing doesn't trip over when --force-hardware is used along with
a bad or stripped vmlinux.

Change-Id: Icce1556b39a7533418668a7f38af30f4463c32e5

Add support for detecting 8929 target and parsing the ramdumps.

Change-Id: I044a93570b82857850957c8b8ebd23df7a9e0389

Print the workqueue information for 3.14 kernel.

Change-Id: Id40503c9f8ad2fc23cff587553e66e0a6a0406fd

The format of the roareadiff output was recently changed, in
[99a8ae9d: "linux-ramdump-parser-v2: Update roareadiff for arm64"].
That change introduced the possibility of printing non-printable
characters in string representations of the memory dumps.  Fix this by
outputting a `.' for non-printable characters.

Change-Id: I1efd0775fac89618f43986523c6a9207afed7e5e

When attempting to locate panicking tasks via the
"--check-for-panic" option, the taskdump parser currently attempts
to exhaustively check every task in kernel task list to see if it
panicked.

To improve performance, task checking can be limited to tasks that
were listed as currently running at the time the RAM dump was
collected. Other tasks do not need to be checked because a
panicking process is expected to disable IRQs and preemption after
entering the panic handler, and therefore will not yield to any
other tasks executing on the same CPU prior to resetting.

Change-Id: I51d7b979f918e21bfdd2adf2a3429883f11bab6a

The stack and pointer sizes are different on arm64. Update
accordingly.

Change-Id: I262c79ea81671d97fd8bbc8343267cc3bc8c3d38
Acked-by: Kosuke Shitaba <kshibata@qti.qualcomm.com>

Consider the case of a nentries==8 and 3 cpus.
Numbers in parenthesis are the equivalent location in the circular buffer.
CPU:   Index0:  Index1: Index2: Index3:
0      0        3       6       9(1)
1      1        4       7       10(2)
2      2        5       8(0)

The current design is only appropriate for the case where
nentries % nrcpus == 0.

Fix this issue by incrementing the index by (nentries % nrcpus)
each time circular buffer wraps around.

CPU:   Index0:  Index1: Index2:
0      0        3       6+2==8(0)
1      1        4       7+2==9(1)
2      2        5       8+2==10(2)

Change-Id: I439fb540fc2c437c6b642d18aa9683603c270f36

The elf header file is different for arm64. Update it so that
the roareadiff feature can be used on 64bit targets.

Change-Id: Ica4424a6ea9d2e599e1a157353aa5f702a5e4bf8
Acked-by: Kosuke Shitaba <kshibata@qti.qualcomm.com>

The imem start address was missing for 9635. Add it.

Change-Id: Iea221df9f91e7d7ac54393f50ce0ea6b257e7a66

Add a parser which parses relevant thermal device information.

Change-Id: I4edde5a59ba5150cabc282716a42b7084dadda62

struct msm_dump_data contains the name of the entity who filled in the
data structure. Print out this information.

Change-Id: If490c0180bed22ba098d39e8e088170c9552da76

Describe the cache format used in 8992.

Change-Id: I40149802a68527b9b043a643f8d5c18b67916924

For calculating the non-LPAE ARMv7 TTBR0 offset, use swapper_pg_dir_addr
obtained from an address lookup instead of hardcoded value.

Change-Id: I96a82ee62ca5cbe86b696657af8822e513d5393c

Handling few more error conditions while printing physical
addresses in RTB logs

Change-Id: Idfb75f4ed048d22dd3d8a6c69cd1e9187c9c94c2

Dump tv1 to tv5 timers for all the cores in the system.

Change-Id: I5df5b041e655fc28204a627a54dfd09e8d981c6e

Decode the tag-ram according to the processor and cache type. Print
the decoded information alongside each cacheline in a table format.

Support A53 L1 Data Caches.
Support A57 L1 Instruction and Data Cache, L2 Cache.

Change-Id: I3e74affb69a91b1ca1399be604366e7f1fb0cd27

prepare_count and count are 32-bit variables instead of 64-bit variables.

Change-Id: I7a0e81a5b7adc40d65ac9bec5be3763a10d23581

CPUMERRSR and L2MERRSR are CP15 registers so no need to set them in
core{X}_regs.cmm script.

Change-Id: I740ec7e96948b4fd887f1ae9095d663cc91601dd

Add support for detecting 9640 target and parsing the ramdumps

Change-Id: I085962bc75251b1f3e103546719119583d9baba5

Address the corner case where we end up in a continuous (almost
inifinite) loop when blk value equals rwpval. Change the
condition from blk < rwpval to blk <= rwpval to fix this.

Change-Id: I67923f3fa681e64eaff1821be7ae9805f66d47df

Add support for detecting 8992 target and parsing the ramdumps.

Change-Id: I06b88d67afdfea6a3c6867911c96ebe1317c2ce8

Add support for detecting 8908 target and parsing the ramdumps.

Change-Id: I9195e3ff47ed17ceffa2d634b3c827ea71d71559

Add a parser which parses relevant CPR regulator information
such as target quotient, enable flag and most recent voltage for
each registered cpr regulator.

Change-Id: I15432179a0cfd76575236be9c276f83a8ef7124e

Add support to parse PMIC register dump in debug image and
generate an XML file with PMIC registers information.

Change-Id: Ie0d85456711be48c8e8d5312e81712106868af4b

Add support to parse cpu dump version 1.3. This version adds support
to dumps CPUMERRSR and L2MERRSR for each apps core.

Change-Id: Ib4089376d2da06d29ad1c0c8d064d526f5aeb302

Pass debug data version to client functions while parsing debug
image.

Change-Id: Iab3d83182afbfdee8af0f90f5a7df91c0a8fc770

Dump clock name, count, prepare_count, rate, clock structure
for all the clocks in the system.

Change-Id: I34dc3512e156319b6f93ca0f4a1c38a44ba55561

Print the addresses of irq_desc structure to aid with debugging.

Change-Id: I7ddb6b643bbf400300645e0aaad1962604ac46a3

Print physical addresses for the virtual addresses in
READL and WRITEL logtype

Change-Id: I37300be6ceb47ed0d02e3e5476a3f24175fa814f

Add support for detecting 8909 target and parsing the ramdumps.

Change-Id: I76a8b9366797a83d0a84fbb4894261488a94ed26

Requires CONFIG_LOG_BUF_MAGIC; otherwise no error checking will be
performed.

A log record is valid if:
1) The magic value matches
2) the length recorded in the header matches the sum of the lengths of the
subelements.

If a log record fails this check, perform a linear search
to find the next matching log record.

Change-Id: I584350c8bc1bf93c2d956fa1e05db8207cc2d40d

Kernel change 62e32ac3505a0cab1c5ef8ea2c0eab3b26ed855f
renamed 'struct log' to 'struct printk_log'. Detect which kernel
version is being parsed and use the appropriate struct name.

Change-Id: I1a92623e8b4167f390d09051a52e6411ae3901ee

T32 simulator sessions currently launched from lrdp shortcuts do not
contain anything that allows separate sessions to be distinguished
from one another. Add a line that updates the titlebar of any launched
t32 simulator session with the full path to the RAM dumps being loaded
in the session.

Change-Id: I4273b4f000c96ed13af897dd23c0cd19b36c9a80

hexdump currently prints to stdout.  Although that's convenient for
interactive debugging it's not very useful for re-use in other parts of
the parser.  Return a string instead of printing to stdout.

Also add a usage example.

Change-Id: I18535f5339be85ffc5661e51430bba9a55fe665d