Add cache, tlb and ram dump parsing support for
sdmmagpie in steppe target.

Change-Id: I0194e08c30f50839dbf06c7ce2d3e7906c1ba298
Signed-off-by: Prateek Sood <prsood@codeaurora.org>

This patch fixes the need for a hard coded value
to specify upper limit on length of the Linux Banner.

get_version() inside ramdump.py has been renamed to
get_matched_version() to reflect the true nature of
the function.

Added a variable banner_len in get_matched_version()
which is the length of linux_banner returned by
gdbmi.get_value_of_string('linux_banner').
This variable is further passed to read_cstring()
function to specify the max limit of characters to
be read. We are dynamically calculating the length
using gdb to read linux banner.

Change-Id: I571882a5999c26ccd8accd90b26d0149c839633b
Signed-off-by: Kumar Harsh <harkumar@codeaurora.org>

Parsing the refcount for each dmabuf and correct the Time Alive
for each dmabuf.

And shorting the slabsummary info based on total slab usages.

Change-Id: I7c573d8a9c70786a60156a122f412e0e884c0cb5
Signed-off-by: Ankur Bansal <ankban@codeaurora.org>

Parse ping_start, ping_end and other params from wdog_data structure

Change-Id: Ia697ab942f237cc7e1a6c7af8ae3a121dc1c8406
Signed-off-by: Mahesh Komuravelli <mkomurav@codeaurora.org>

Add range feature in pagetracking.py.
sometimes we need page owner of particular page or physical address
and we need to run complete pagetracking which is taking more time.
now with this we can get the owner call stack by providing the below
option in few seconds.

Ex of flags given in ramparser cmd :
1) pagetracking for range from phy_addr1 to phy_add2
--print-pagetrcking ranges=addr1-addr2

2) page owner for particular page
--print-pagetracking page=<page>

Change-Id: I5113b5da4a71865ae2813fa48a1b306fb72eb8ff
Signed-off-by: Ankur Bansal <ankban@codeaurora.org>

in case of task list corruption, lsof is breaking
or stuck in look because of cycle is found in taks list.

use the task list iterator API which is handling all
task list corruption case.

Change-Id: I8f9f89e47307c603ce13a56edecd7c576c80ca61
Signed-off-by: Ankur Bansal <ankban@codeaurora.org>

ion_buffer_parse.py is looping continuously in case
of task list corruption or task's thread corruption.
using the task list iterator API which is handling
all such task list corruption cases.

cleanup code in memusages.py and use the task list
iterator API.

Change-Id: I611cba31d8df14e29fc3250233d9ad1e99e919ee
Signed-off-by: Ankur Bansal <ankban@codeaurora.org>

Add a utility function for iterating through all valid process
and thread of each process.
Use it in different parser where we are traversing through the task
list Ex : memusages.py, ion_buffer_parse.py

Change-Id: Ided26acc67e7c5dc2ba7d4c2db0935f0c9fa24f1
Signed-off-by: Ankur Bansal <ankban@codeaurora.org>

Add information about ion heap for dmabufs if exporter of the
dmabuf is ion.

Change-Id: I06ea835def4be0bdcd2e1967d098cdbf07e61247
Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org>

Add correct cpu dump id for QCS405 and 403 to match with TZ SDI

Change-Id: Ia64fbd00a9cbf7fb886ca77020708acfd95acaa7
Signed-off-by: Archit Saxena <archsaxe@codeaurora.org>

With SMMU support on ETR, ETR uses iova instead of physical
address.  Add support to translate iova to physical address
and dump ETR.

Change-Id: Id46bfdcc80dd7a2bfd5c72d4e40171ea5c25cbc4

Fix for broken reserved_mem.py in case of cma area dump.
if CONFIG_MEMORY_HOTPLUG is enabled then SECTION_SIZE_BITS is
CONFIG_HOTPLUG_SIZE_BITS else it is 30.

Signed-off-by: Ankur Bansal <ankban@codeaurora.org>
Change-Id: Iaceb6d1c0f2753d94d420e9d9f8cacff3a6b57d4

in some case db_list is corrupted so parsing the db_list in
both forward and reverse direction to get more ion buffer usages
data.

Change-Id: Ic48aa737b0939d83517d501700577b7a27e85188
Signed-off-by: Ankur Bansal <ankban@codeaurora.org>

Use elf header to decide vmlinux is 32 or 64 bits instead of parameter

Change-Id: Id2f68fc58160e259a011247b6cbfd4efa9dab5e4

Update target names, so that targets can be identified, and the
correct configurations are used when using the ramparser.

Change-Id: I254c65662943dd43f99fb12d22f1a17bc9f01283

1) When lrdp-v2 is parsing RAM dumps generated on ARM-32 platforms,
   the Trace32 startup script will not contain any instructions
   to enable MMU support, which causes Linux kernel symbol loading
   failure on some newer Trace32 simulators.

   Add Trace32 startup instruction to set bit 0 of P15:0x1 if
   lrdp-v2 detects MMU support within the RAM dump.

2) Use task.symbol.loadmod instead of data.load.elf to load all
   the kernel moduels' symbols to avoid symbol loading failures.

Change-Id: Ibae79e3c80279788d7cccd28080d2cecd5432a4b

Ion buffer info printed, with buffers and processes sorted by size.

Change-Id: I22480f99a26a36e29bfd99c05701aab1bbe8e2d6
Signed-off-by: Dylan Hatch <dhatch@codeaurora.org>

Add cache, tlb and ram dump parsing support for
steppe.

Change-Id: I47f41ae0014340b284c60fd406f1ef8096521d46
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>

Fix for broken pagetraking.py
if CONFIG_MEMORY_HOTPLUG is enabled then SECTION_SIZE_BITS is
CONFIG_HOTPLUG_SIZE_BITS else it is 30.

Change-Id: Ib3ef043ae150dfd674e37b0a853a1e4569abda8c

Architecture format was not getting passed while parsing scandumps for 32 bit targets
and resulting in parsing debug image. Added support to pass this info for 32 bit
devices while parse scandump

Change-Id: I9814921303bcf636e4ea666eb50b3add48de6b31
Signed-off-by: avijayku <avijayku@codeaurora.org>

Add ETF SWAO dump region need to parser.

Change-Id: I1792d009b667c7e7b8933c01ecaf4ccceb494ad2
Signed-off-by: Mulu He <muluhe@codeaurora.org>

Check for invalid entries, when extracting the pagetables from ramdump.

Change-Id: I35250c4c47af9046636dc135cda5f7a6f882cd69
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>

with this change, we can get reserverd_mem info, cma regions
and __softirq_pending stats.

Change-Id: Iab493506d5be539bfefcb9db629516624250bbc1

Add support for detecting QCS605 target and parsing the ramdumps.

Change-Id: I80e8e54340fe6fea0c6471570fbe45faf6920699
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>

Add timeout for QTF parsing so that parsing can continue even if
QTF parsing is stuck or taking too much time

Change-Id: I7707f843a05391638566de0a917fe2355ee12124

Parsing ion buffer info (dma_buf) for kernel-4.14 to debug
ion memory leak issue

Change-Id: I0797d3644148f449b98d789d84dbd671cc5ab754

Fix for broken pagetracking.py for kernel-4.14.

Change-Id: Ib6f1adf9b0036c4b93b73b98e0700f91a8e98e03

smem_addr_buildinfo is a necessary property for a target
to have, so that minidump support can be available for
a target. Add smem_addr_buildinfo for to enable
minidump support.

Change-Id: Ic65a2fda220366d3f2ecf8104cb651fb4041510a

Add support for detecting SDM429/SDA439/SDA429 target
and parsing the ramdumps.

Change-Id: I53168a87122b387d76452b0b9190a674122e3162
Signed-off-by: Jingbiao Lu <jingbiao@codeaurora.org>

Add decoding information for L1 I/D and L2 caches for
new target.

Change-Id: I6d947f8906797a2dcc247b4d5a8c38669ea87aa4

Moving to new parsing tool for kryo3 and kryo4 cpus
from msmnile onwards.

Change-Id: I96cb3ec7d5299aacff82bf5c7a0f991dbb99bedc

Add TLB Dump Support for new target cores.

Change-Id: Ic973a3d0a0e3e441bce1531af720ee1bad57e11c

Due to change in enum on 4.14 kernel, ftrace is not properly generated.

Change-Id: I73d12d2a836d7572140e89c2f01ed5a3ca42ed67

Target codenames were recently update. Update files
to reflect name changes, so that correct target names
are used for the ramparser.

Change-Id: Ibf225cdc91141da7c061f67f722d7f70901e4133

Fix for broken clockdump.py in case of dynamic modules.

Change-Id: Id3576871d93cc5628d2e607db589800ff2550231

Handle the exception caused in lookup of symbol in dynamic modules.

Change-Id: If0fa6a118569da6aa368307e3c27ec4b3c497cd1

Use correct length for reading physical memory in continous
memory type of etr.

Change-Id: Ia4545b22a553b5e787ebfaf01888c85b35d192dc

gdb returns 200 chars by default on symbol read. if linux_banner is more than 200 chars, we are seeing symbol mismatch

Change-Id: I9911d4387ec94f812776824834064a2b42ed3250
Signed-off-by: Shivendra Pratap <spratap@codeaurora.org>

MSM_DUMP_DATA_TMC_ETR_REG is also for etr dump in some platforms.
Add the support of it to dump tmc-etr.bin successfully.

Change-Id: I7bd19e4c95aabcf2159344cfde938d4153eb0ae8

	board.py and cachedumplib file are modified to support sdm439 dump parsing

Change-Id: I15029ebf1b522903c000b82913362e466688ca42