From 3d3d56ccf4829c28c82a2c0e7b7fa7bacc46d673 Mon Sep 17 00:00:00 2001 From: Mahesh Kumar Kalikot Veetil <mkalikot@codeaurora.org> Date: Sun, 5 Apr 2020 15:48:04 -0700 Subject: [PATCH] ini: Add chip specific config files Add specific files for qca6390 and qca6490. Change-Id: Iaf3d6b967e61765ad40d8839cbb1c68e71d9cf60 CRs-Fixed: 2661906 --- kona/WCNSS_qcom_cfg_qca6390.ini | 310 ++++++++++++++++++++++++++++++ kona/WCNSS_qcom_cfg_qca6490.ini | 326 ++++++++++++++++++++++++++++++++ 2 files changed, 636 insertions(+) create mode 100644 kona/WCNSS_qcom_cfg_qca6390.ini create mode 100644 kona/WCNSS_qcom_cfg_qca6490.ini diff --git a/kona/WCNSS_qcom_cfg_qca6390.ini b/kona/WCNSS_qcom_cfg_qca6390.ini new file mode 100644 index 0000000..04f5fce --- /dev/null +++ b/kona/WCNSS_qcom_cfg_qca6390.ini @@ -0,0 +1,310 @@ +# This file allows user to override the factory +# defaults for the WLAN Driver + +# Phy Mode (auto, b, g, n, etc) +# Valid values are 0-12, with 0(Min) = Auto, 12(Max) = 11ax +# 1 = 11abg, 2 = 11b, 3 = 11g, 4 = 11n, 5 = 11g only, 6 = 11n only +# 7 = 11b only 8 = 11ac only, 9 = 11ac, 12 = 11ax. +gDot11Mode=0 + +# UAPSD service interval for VO,VI, BE, BK traffic +InfraUapsdVoSrvIntv=0 +InfraUapsdViSrvIntv=0 +InfraUapsdBeSrvIntv=0 +InfraUapsdBkSrvIntv=0 + +# Flag to allow STA send AddTspec even when ACM is Off +gAddTSWhenACMIsOff=1 + +#Enable OBSS protection +gEnableApOBSSProt=1 + +# Maximum Tx power +# gTxPowerCap=30 + +# Fragmentation Threshold +# gFragmentationThreshold=2346 + +# RTS threshold +RTSThreshold=1048576 + +# WMM Enable/Disable +WmmIsEnabled=0 + +# 802.11d support +g11dSupportEnabled=0 + +# DFS Master Capability +gEnableDFSMasterCap=1 + +ImplicitQosIsEnabled=0 + +gNeighborScanTimerPeriod=200 +gNeighborLookupThreshold=76 + +# Legacy (non-ESE, non-802.11r) Fast Roaming Support +# To enable, set FastRoamEnabled=1 +# To disable, set FastRoamEnabled=0 +FastRoamEnabled=1 + +#Channel Bonding +gChannelBondingMode5GHz=1 + +#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). +#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link +#is idle for last 10 seconds.) For both active and power save clients. + +#Power save clients: DUT set TIM bit from 10th second onwards and till client +#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client. + +#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not +#success still we try on 11th second if not tries on 12th and so on till 15th +#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any +#case DUT will detect client got removed in (10+5) seconds. +#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. + +#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and +#it is period where we send NULL frame. +#gApLinkMonitorPeriod = 10 +#gGoLinkMonitorPeriod = 10 + +#gApKeepAlivePeriod is time to spend to check whether frame +#are succeed to send or not. Hence total effective detection time is +#(gApLinkMonitorPeriod + gApKeepAlivePeriod) + +# Enable DFS channel roam +# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE +gAllowDFSChannelRoam=1 + +gVhtChannelWidth=2 + +# Set txchainmask and rxchainmask +# These parameters are used only if gEnable2x2 is 0 +# Valid values are 1,2 +# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. +# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. +gSetTxChainmask1x1=1 +gSetRxChainmask1x1=1 + +# MCC to SCC Switch mode: +# 0-Disable +# 1-Enable +# 2-Force SCC if same band, with SAP restart +# 3-Force SCC if same band, without SAP restart by sending (E)CSA +# 4-Force SCC if same band (or) use SAP mandatory channel for DBS, +# without SAP restart by sending (E)CSA +gWlanMccToSccSwitchMode = 3 + +# 1=enable tx STBC; 0=disable +gEnableTXSTBC=1 + +#Enable/Disable Tx beamformee in SAP mode +gEnableTxBFeeSAP=1 + +# Enable Tx beamforming in VHT20MHz +# Valid values are 0,1. If commented out, the default value is 0. +# 0=disable, 1=enable +gEnableTxBFin20MHz=1 + +#Enable/Disable SU Tx beamformer support +gEnableTxSUBeamformer=1 + +# 802.11K support +gRrmEnable=1 + +# Firmware log mode +# Valid values are 0,1,2 +# 0=Disable, 1=WMI, 2=DIAG +gEnablefwlog=2 + +# Maximum Receive AMPDU size (VHT only. Valid values: +# 0->8k 1->16k 2->32k 3->64k 4->128k) +gVhtAmpduLenExponent=7 + +# Maximum MPDU length (VHT only. Valid values: +# 0->3895 octets, 1->7991 octets, 2->11454 octets) +gVhtMpduLen=2 + +#Enable or Disable p2p device address administered +isP2pDeviceAddrAdministrated=0 + +#Enable VHT on 2.4Ghz +gEnableVhtFor24GHzBand=1 + +#Maximum number of offload peers supported +# gMaxOffloadPeers=2 + +# controlling the following offload patterns +# through ini parameter. Default value is 1 +# to disable set it to zero. ssdp = 0 +# Setup multicast pattern for mDNS 224.0.0.251, +# SSDP 239.255.255.250 and LLMNR 224.0.0.252 +ssdp=0 + +# RA filtering rate limit param, the current value would not +# help if the lifetime in RA is less than 3*60=3min. Then +# we need to change it, though it is uncommon. +# gRAFilterEnable=0 +gRArateLimitInterval=600 + +# Maximum number of concurrent connections +gMaxConcurrentActiveSessions=3 + +# Disable/Enable GreenAP +# 0 to disable, 1 to enable, default: 1 +gEnableGreenAp=0 + +#Enable/Disable LPASS support +# 0 to disable, 1 to enable +gEnableLpassSupport=1 + +# Whether userspace country code setting shld have priority +gCountryCodePriority=1 + +# Enable or Disable Multi-user MIMO +# 1=Enable (default), 0=Disable +gEnableMuBformee=1 + +# Enable support for TDLS +# 0 - disable +# 1 - enable +gEnableTDLSSupport=1 + +# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall +# initiate TDLS Discovery towards a peer whenever setup criteria (throughput +# and RSSI) is met and then will initiate teardown when teardown criteria +# (idle packet count and RSSI) is met. +# 0 - disable +# 1 - enable +gEnableTDLSImplicitTrigger=1 + +# Enable TDLS External Control. That is, user space application has to +# first configure a peer MAC in wlan driver towards which TDLS is desired. +# Device will establish TDLS only towards those configured peers whenever +# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS +# when teardown criteria (idle packet count and RSSI) is met. However, +# device will accept TDLS connection if it is initiated from any other peer, +# even if that peer is not configured. +# 0 - disable +# 1 - enable +# For TDLS External Control, Implicit Trigger must also be enabled. +gTDLSExternalControl=1 + +# Enable support for TDLS off-channel operation +# 0 - disable +# 1 - enable +# TDLS off-channel operation will be invoked when there is only one +# TDLS connection. +gEnableTDLSOffChannel=1 + +# VHT Tx/Rx MCS values +# Valid values are 0,1,2. If commented out, the default value is 0. +# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 +gVhtRxMCS=2 +gVhtTxMCS=2 + +# VHT Tx/Rx MCS values for 2x2 +# Valid values are 0,1,2. If commented out, the default value is 0. +# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 +gEnable2x2=1 +gVhtRxMCS2x2=2 +gVhtTxMCS2x2=2 + +#IPA config is a bit mask and following are the configurations. +#bit0 IPA Enable +#bit1 IPA PRE Filter enable +#bit2 IPv6 enable +#bit3 IPA Resource Manager (RM) enable +#bit4 IPA Clock scaling enable +#bit5 IPA uC ENABLE +#bit6 IPA uC STA ENABLE +#bit8 IPA Real Time Debugging +gIPAConfig=0x7d +gIPADescSize=800 + +# Enable TCP Segmentation Offload +# 1 - enable 0 - disable +TSOEnable=1 + +# Enable Generic Receive Offload +# 1 - enable(default) 0 - disable +GROEnable=1 + +# Enable HT MPDU Density +# 4 for 2 micro sec +ght_mpdu_density=4 + +# Enable flow steering to enable multiple CEs for Rx flows. +# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs. +# Parallel Rx paths. +# 1 - enable 0 - disable(default) +gEnableFlowSteering=1 + + + +# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND +maxMSDUsPerRxInd=8 + +################ Datapath feature set End ################ + +################ NAN feature set start ################### + +# Enable NAN discovery (NAN 1.0) +# 1 - enable 0 - disable(default) +gEnableNanSupport=1 +# Enable NAN Datapath +genable_nan_datapath=1 + +################ NAN feature set end ##################### + +hostscan_adaptive_dwell_mode=1 + +# Enable/Disable rtt sta mac randomization +enable_rtt_mac_randomization=1 + +#Enable/Disable SNR monitoring +gEnableSNRMonitoring=1 + +# HTC Credit count for WMI operation +# 1 to serialize the WMI commands +# 0 default works with FW advertised credits, 2 credits usually +gWmiCreditCount=1 + +# Enable enhanced ACS +acs_with_more_param=1 +# bits 0-3: rssi weight +# bits 4-7: bss count weight +# bits 8-11: noise floor weight +# bits 12-15: channel free weight +# bits 16-19: tx power range weight +# bits 20-23: tx power throughput weight +# bits 24-31: reserved +AutoChannelSelectWeight=0x00fafafa + +# Enable/Disable broadcast TWT +bcast_twt=1 + +# Enable broadcast logging to the userspace entities +gMulticastHostFwMsgs=1 +# Disable packetlog explicitly +gEnablePacketLog=0 + +# Set IPA bandwidth levels in mbps +gIPALowBandwidthMbps=100 +gIPAMediumBandwidthMbps=400 +gIPAHighBandwidthMbps=800 + +# Enable wlm_latency_enable feature +# 0 - disable, 1 - enable(default) +wlm_latency_enable=1 + +# This ini is used to give higher priority for 5g scc than dbs. +# It is bitmap per enum policy_mgr_con_mode. +# For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system +# preference option, If 5G SCC needs higher priority than dbs, set it as 8. +g_prefer_5g_scc_to_dbs=8 + +END + +# Note: Configuration parser would not read anything past the END marker + diff --git a/kona/WCNSS_qcom_cfg_qca6490.ini b/kona/WCNSS_qcom_cfg_qca6490.ini new file mode 100644 index 0000000..1f34917 --- /dev/null +++ b/kona/WCNSS_qcom_cfg_qca6490.ini @@ -0,0 +1,326 @@ +# This file allows user to override the factory +# defaults for the WLAN Driver + +# Phy Mode (auto, b, g, n, etc) +# Valid values are 0-12, with 0(Min) = Auto, 12(Max) = 11ax +# 1 = 11abg, 2 = 11b, 3 = 11g, 4 = 11n, 5 = 11g only, 6 = 11n only +# 7 = 11b only 8 = 11ac only, 9 = 11ac, 12 = 11ax. +gDot11Mode=0 + +# UAPSD service interval for VO,VI, BE, BK traffic +InfraUapsdVoSrvIntv=0 +InfraUapsdViSrvIntv=0 +InfraUapsdBeSrvIntv=0 +InfraUapsdBkSrvIntv=0 + +# Flag to allow STA send AddTspec even when ACM is Off +gAddTSWhenACMIsOff=1 + +#Enable OBSS protection +gEnableApOBSSProt=1 + +# Maximum Tx power +# gTxPowerCap=30 + +# Fragmentation Threshold +# gFragmentationThreshold=2346 + +# RTS threshold +RTSThreshold=1048576 + +# WMM Enable/Disable +WmmIsEnabled=0 + +# 802.11d support +g11dSupportEnabled=0 + +# DFS Master Capability +gEnableDFSMasterCap=1 + +ImplicitQosIsEnabled=0 + +gNeighborScanTimerPeriod=200 +gNeighborLookupThreshold=76 + +# Legacy (non-ESE, non-802.11r) Fast Roaming Support +# To enable, set FastRoamEnabled=1 +# To disable, set FastRoamEnabled=0 +FastRoamEnabled=1 + +#Channel Bonding +gChannelBondingMode5GHz=1 + +#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). +#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link +#is idle for last 10 seconds.) For both active and power save clients. + +#Power save clients: DUT set TIM bit from 10th second onwards and till client +#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client. + +#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not +#success still we try on 11th second if not tries on 12th and so on till 15th +#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any +#case DUT will detect client got removed in (10+5) seconds. +#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. + +#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and +#it is period where we send NULL frame. +#gApLinkMonitorPeriod = 10 +#gGoLinkMonitorPeriod = 10 + +#gApKeepAlivePeriod is time to spend to check whether frame +#are succeed to send or not. Hence total effective detection time is +#(gApLinkMonitorPeriod + gApKeepAlivePeriod) + +# Enable DFS channel roam +# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE +gAllowDFSChannelRoam=1 + +gVhtChannelWidth=2 + +# Set txchainmask and rxchainmask +# These parameters are used only if gEnable2x2 is 0 +# Valid values are 1,2 +# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. +# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. +gSetTxChainmask1x1=1 +gSetRxChainmask1x1=1 + +# MCC to SCC Switch mode: +# 0-Disable +# 1-Enable +# 2-Force SCC if same band, with SAP restart +# 3-Force SCC if same band, without SAP restart by sending (E)CSA +# 4-Force SCC if same band (or) use SAP mandatory channel for DBS, +# without SAP restart by sending (E)CSA +gWlanMccToSccSwitchMode = 3 + +# 1=enable tx STBC; 0=disable +gEnableTXSTBC=1 + +#Enable/Disable Tx beamformee in SAP mode +gEnableTxBFeeSAP=1 + +# Enable Tx beamforming in VHT20MHz +# Valid values are 0,1. If commented out, the default value is 0. +# 0=disable, 1=enable +gEnableTxBFin20MHz=1 + +#Enable/Disable SU Tx beamformer support +gEnableTxSUBeamformer=1 + +# 802.11K support +gRrmEnable=1 + +# Firmware log mode +# Valid values are 0,1,2 +# 0=Disable, 1=WMI, 2=DIAG +gEnablefwlog=2 + +# Maximum Receive AMPDU size (VHT only. Valid values: +# 0->8k 1->16k 2->32k 3->64k 4->128k) +gVhtAmpduLenExponent=7 + +# Maximum MPDU length (VHT only. Valid values: +# 0->3895 octets, 1->7991 octets, 2->11454 octets) +gVhtMpduLen=2 + +#Enable or Disable p2p device address administered +isP2pDeviceAddrAdministrated=0 + +#Enable VHT on 2.4Ghz +gEnableVhtFor24GHzBand=1 + +#Maximum number of offload peers supported +# gMaxOffloadPeers=2 + +# controlling the following offload patterns +# through ini parameter. Default value is 1 +# to disable set it to zero. ssdp = 0 +# Setup multicast pattern for mDNS 224.0.0.251, +# SSDP 239.255.255.250 and LLMNR 224.0.0.252 +ssdp=0 + +# RA filtering rate limit param, the current value would not +# help if the lifetime in RA is less than 3*60=3min. Then +# we need to change it, though it is uncommon. +# gRAFilterEnable=0 +gRArateLimitInterval=600 + +# Maximum number of concurrent connections +gMaxConcurrentActiveSessions=3 + +# Disable/Enable GreenAP +# 0 to disable, 1 to enable, default: 1 +gEnableGreenAp=0 + +#Enable/Disable LPASS support +# 0 to disable, 1 to enable +gEnableLpassSupport=1 + +# Whether userspace country code setting shld have priority +gCountryCodePriority=1 + +# Enable or Disable Multi-user MIMO +# 1=Enable (default), 0=Disable +gEnableMuBformee=1 + +# Enable support for TDLS +# 0 - disable +# 1 - enable +gEnableTDLSSupport=1 + +# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall +# initiate TDLS Discovery towards a peer whenever setup criteria (throughput +# and RSSI) is met and then will initiate teardown when teardown criteria +# (idle packet count and RSSI) is met. +# 0 - disable +# 1 - enable +gEnableTDLSImplicitTrigger=1 + +# Enable TDLS External Control. That is, user space application has to +# first configure a peer MAC in wlan driver towards which TDLS is desired. +# Device will establish TDLS only towards those configured peers whenever +# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS +# when teardown criteria (idle packet count and RSSI) is met. However, +# device will accept TDLS connection if it is initiated from any other peer, +# even if that peer is not configured. +# 0 - disable +# 1 - enable +# For TDLS External Control, Implicit Trigger must also be enabled. +gTDLSExternalControl=1 + +# Enable support for TDLS off-channel operation +# 0 - disable +# 1 - enable +# TDLS off-channel operation will be invoked when there is only one +# TDLS connection. +gEnableTDLSOffChannel=1 + +# VHT Tx/Rx MCS values +# Valid values are 0,1,2. If commented out, the default value is 0. +# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 +gVhtRxMCS=2 +gVhtTxMCS=2 + +# VHT Tx/Rx MCS values for 2x2 +# Valid values are 0,1,2. If commented out, the default value is 0. +# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 +gEnable2x2=1 +gVhtRxMCS2x2=2 +gVhtTxMCS2x2=2 + +#IPA config is a bit mask and following are the configurations. +#bit0 IPA Enable +#bit1 IPA PRE Filter enable +#bit2 IPv6 enable +#bit3 IPA Resource Manager (RM) enable +#bit4 IPA Clock scaling enable +#bit5 IPA uC ENABLE +#bit6 IPA uC STA ENABLE +#bit8 IPA Real Time Debugging +gIPAConfig=0 +gIPADescSize=800 + +# Enable TCP Segmentation Offload +# 1 - enable 0 - disable +TSOEnable=1 + +# Enable Generic Receive Offload +# 1 - enable(default) 0 - disable +GROEnable=1 + +# Enable HT MPDU Density +# 4 for 2 micro sec +ght_mpdu_density=4 + +# Enable flow steering to enable multiple CEs for Rx flows. +# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs. +# Parallel Rx paths. +# 1 - enable 0 - disable(default) +gEnableFlowSteering=1 + +# Enable Rx FISA support +# 0 - disable(default for non-QCA6490), 1 - enable(default for QCA6490) +dp_rx_fisa_enable=1 + +# FISA FSE flow table size +dp_rx_flow_search_table_size=128 + +# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND +maxMSDUsPerRxInd=8 + +################ Datapath feature set End ################ + +################ NAN feature set start ################### + +# Enable NAN discovery (NAN 1.0) +# 1 - enable 0 - disable(default) +gEnableNanSupport=1 +# Enable NAN Datapath +genable_nan_datapath=1 + +################ NAN feature set end ##################### + +hostscan_adaptive_dwell_mode=1 + +# Enable/Disable rtt sta mac randomization +enable_rtt_mac_randomization=1 + +#Enable/Disable SNR monitoring +gEnableSNRMonitoring=1 + +# HTC Credit count for WMI operation +# 1 to serialize the WMI commands +# 0 default works with FW advertised credits, 2 credits usually +gWmiCreditCount=1 + +# Enable enhanced ACS +acs_with_more_param=1 +# bits 0-3: rssi weight +# bits 4-7: bss count weight +# bits 8-11: noise floor weight +# bits 12-15: channel free weight +# bits 16-19: tx power range weight +# bits 20-23: tx power throughput weight +# bits 24-31: reserved +AutoChannelSelectWeight=0x00fafafa + +# Enable/Disable broadcast TWT +bcast_twt=1 + +# Enable Runtime PM +# 0 - RTPM disabled, so CxPC aware RTPM will be disabled as well +# 1 - RTPM enabled, but CxPC aware RTPM disabled (i.e, Static Runtime PM) +# 2 - RTPM enabled and CxPC aware RTPM enabled as well (i.e, Dynamic Runtime PM) +gRuntimePM=2 +gRuntimePMDelay=500 + +active_max_channel_time_6g=60 +passive_max_channel_time_6g=60 + +# Enable broadcast logging to the userspace entities +gMulticastHostFwMsgs=1 +# Disable packetlog explicitly +gEnablePacketLog=0 + +# Set IPA bandwidth levels in mbps +gIPALowBandwidthMbps=100 +gIPAMediumBandwidthMbps=400 +gIPAHighBandwidthMbps=800 + +# Enable wlm_latency_enable feature +# 0 - disable, 1 - enable(default) +wlm_latency_enable=1 +spectral_disable=1 + +# This ini is used to give higher priority for 5g scc than dbs. +# It is bitmap per enum policy_mgr_con_mode. +# For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system +# preference option, If 5G SCC needs higher priority than dbs, set it as 8. +g_prefer_5g_scc_to_dbs=8 + +END + +# Note: Configuration parser would not read anything past the END marker + -- GitLab